diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 5cf2a04..5ab6fe6 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -106,6 +106,7 @@
 #define CONFIG_BOOTDELAY	5    /* autoboot after 5 seconds */
 #define CONFIG_BOOTARGS		"root=/dev/ram rw"
 #define CONFIG_ETHADDR		00:e0:0c:bc:e0:60
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR		00:e0:0c:bc:e0:61
 #define CONFIG_IPADDR		192.162.1.2
 #define CONFIG_NETMASK		255.255.255.0
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 1542047..d64dd2a 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -98,6 +98,7 @@
 /* Ethernet stuff */
 #define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
 #define CONFIG_ETHADDR	00:50:C2:1E:AF:FE
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FD
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index 5a00133..8de9819 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -50,8 +50,6 @@
 #define CONFIG_BAUDRATE		9600
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz	*/
-
 #define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
 
 #define CONFIG_BOOTDELAY	5
@@ -63,7 +61,10 @@
 				CFG_CMD_DATE	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_EEPROM	| \
+				CFG_CMD_FAT	| \
+				CFG_CMD_FLASH	| \
 				CFG_CMD_I2C	| \
+				CFG_CMD_IDE	| \
 				CFG_CMD_PCI	| \
 				CFG_CMD_SDRAM	)
 
@@ -344,7 +345,7 @@
 #define ST16552_B_BASE	0x80400000	/* ST16552 channel A		*/
 #define BCSR_BASE	0x80600000	/* board control / status registers */
 #define DISPLAY_BASE	0x80600040	/* DISPLAY base			*/
-#define PCMCIA_MEM_BASE 0x81000000	/* PCMCIA memory window base	*/
+#define PCMCIA_MEM_BASE 0x83000000	/* PCMCIA memory window base	*/
 #define PCMCIA_IO_BASE	0xFE000000	/* PCMCIA IO window base	*/
 
 
@@ -464,4 +465,46 @@
 #define PCI_ENET0_MEMADDR	0x82000000
 #define PCI_PLX9030_IOADDR	0x82100000
 #define PCI_PLX9030_MEMADDR	0x82100000
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_I82365
+
+#define CFG_PCMCIA_MEM_ADDR	PCMCIA_MEM_BASE
+#define CFG_PCMCIA_MEM_SIZE	0x1000
+
+#define CONFIG_PCMCIA_SLOT_A
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for IDE not supported	*/
+#define	CONFIG_IDE_LED			/* LED   for IDE is  supported	*/
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_HMI10
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+
+#define CFG_ATA_DATA_OFFSET	CFG_PCMCIA_MEM_SIZE
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	CFG_PCMCIA_MEM_SIZE
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x400)
+
+#define CONFIG_DOS_PARTITION
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index e318b27..d6ce8a8 100644
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -105,6 +105,7 @@
 /* first ethernet */
 #define CONFIG_ETHADDR		64:36:00:00:00:01
 											     /* next two ethernet hwaddrs */
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR		64:36:00:00:00:02
 /* in the atlantis 64360 we have only 2 ETH port on the board,
 if we use PCI it has its own MAC addr */
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
index e58b63a..fb02481 100644
--- a/include/configs/DB64460.h
+++ b/include/configs/DB64460.h
@@ -43,7 +43,9 @@
 #define __LOCAL_H
 
 #define CONFIG_ETHADDR		64:46:00:00:00:01
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR		64:46:00:00:00:02
+#define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR		64:46:00:00:00:03
 
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index df4ed39..af96c7c 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -164,6 +164,7 @@
 /* adding Ethernet setting:  FTS OUI 00:11:0B */
 /*----------------------------------------------------------------------------*/
 #define CONFIG_ETHADDR          00:11:0B:00:00:01
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR         00:11:0B:00:00:02
 #define CONFIG_IPADDR		10.48.8.178
 #define CONFIG_IP1ADDR		10.48.8.188
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 57212e0..2d7cf2f 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -126,6 +126,7 @@
 /* Ethernet stuff */
 #define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
 #define CONFIG_ETHADDR	00:50:C2:1E:AF:FE
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FD
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index 9ec1c08..8aa18ca 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -177,8 +177,10 @@
 /* Environment is in flash, there is little space left in Serial EEPROM */
 #define CFG_ENV_IS_IN_FLASH
 #define CFG_ENV_SECT_SIZE	0x10000 	/* We use one complete sector	*/
+#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 #define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index 17402f0..91011be 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -90,6 +90,7 @@
 					     & ~CFG_CMD_DTT	\
 					     & ~CFG_CMD_EEPROM	\
 					     & ~CFG_CMD_ELF	\
+					     & ~CFG_CMD_EXT2	\
 					     & ~CFG_CMD_FDC	\
 					     & ~CFG_CMD_FDOS	\
 					     & ~CFG_CMD_HWFLOW	\
@@ -106,6 +107,7 @@
 					     & ~CFG_CMD_REISER	\
 					     & ~CFG_CMD_SCSI	\
 					     & ~CFG_CMD_SPI	\
+					     & ~CFG_CMD_UNIVERSE\
 					     & ~CFG_CMD_USB	\
 					     & ~CFG_CMD_VFD	\
 					     & ~CFG_CMD_XIMG	)
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 0d5b05a..6b7bdda 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -185,6 +185,7 @@
 				 CFG_CMD_DTT	| \
 				 CFG_CMD_EEPROM | \
 				 CFG_CMD_ELF    | \
+				 CFG_CMD_EXT2	| \
 				 CFG_CMD_FAT    | \
 				 CFG_CMD_FDC	| \
 				 CFG_CMD_FDOS	| \
@@ -198,6 +199,7 @@
 				 CFG_CMD_REISER	| \
 				 CFG_CMD_SCSI	| \
 				 CFG_CMD_SPI	| \
+				 CFG_CMD_UNIVERSE | \
 				 CFG_CMD_USB	| \
 				 CFG_CMD_VFD	| \
 				 CFG_CMD_XIMG
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index a4018f8..88efd95 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -155,6 +155,7 @@
 				 CFG_CMD_DTT	| \
 				 CFG_CMD_EEPROM | \
 				 CFG_CMD_ELF    | \
+				 CFG_CMD_EXT2	| \
 				 CFG_CMD_FDC	| \
 				 CFG_CMD_FDOS	| \
 				 CFG_CMD_HWFLOW	| \
@@ -168,6 +169,7 @@
 				 CFG_CMD_SCSI	| \
 				 CFG_CMD_SPI	| \
 				 CFG_CMD_VFD	| \
+				 CFG_CMD_UNIVERSE | \
 				 CFG_CMD_USB	| \
 				 CFG_CMD_XIMG	) )
 
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index a53b963..874e962 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -458,7 +458,9 @@
 /* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
 #endif
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 9824241..d4cba33 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -415,7 +415,9 @@
 /* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
 #endif
 
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 6b4191e..49518d8 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -415,7 +415,9 @@
 /* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
 #endif
 
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 2a31dd7..d58e6a7 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -504,7 +504,9 @@
 /* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
 #endif
 
diff --git a/include/configs/OCOTEA.h b/include/configs/OCOTEA.h
index 6f8fd1d..f69ab1b 100644
--- a/include/configs/OCOTEA.h
+++ b/include/configs/OCOTEA.h
@@ -154,8 +154,11 @@
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_IPADDR		10.1.2.3
 #define CONFIG_ETHADDR		00:04:AC:E3:28:8A
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR		00:04:AC:E3:28:8B
+#define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR		00:04:AC:E3:28:8C
+#define CONFIG_HAS_ETH3
 #define CONFIG_ETH3ADDR		00:04:AC:E3:28:8D
 #define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
 #define CONFIG_SERVERIP		10.1.2.2
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index c58e990..5f748a0 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -102,6 +102,8 @@
 
 #define CONFIG_MISC_INIT_R	1		/* call misc_init_r() on init	*/
 
+#define CONFIG_HAS_ETH1		1		/* add support for eth1addr	*/
+
 #define CONFIG_SHOW_BOOT_PROGRESS 1		/* Show boot progress on LEDs   */
 
 /*
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 03020f2..2ffe89f 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -92,6 +92,7 @@
 /* Ethernet stuff */
 #define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
 #define CONFIG_ETHADDR	00:50:c2:1e:af:fe
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index 3592290..4623dbb 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -98,6 +98,7 @@
 				~CFG_CMD_BSP	& \
 				~CFG_CMD_DATE	& \
 				~CFG_CMD_DTT	& \
+				~CFG_CMD_EXT2	& \
 				~CFG_CMD_FDC	& \
 				~CFG_CMD_FDOS	& \
 				~CFG_CMD_HWFLOW	& \
@@ -113,6 +114,7 @@
 				~CFG_CMD_SCSI	& \
 				~CFG_CMD_SETGETDCR & \
 				~CFG_CMD_SPI	& \
+				~CFG_CMD_UNIVERSE & \
 				~CFG_CMD_USB	& \
 				~CFG_CMD_VFD	& \
 				~CFG_CMD_XIMG	)
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 3a09de9..60561eb 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -400,9 +400,11 @@
 
 /*Note: change below for your network setting!!! */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-  #define CONFIG_ETHADDR	00:vv:ww:xx:yy:8a
-  #define CONFIG_ETH1ADDR	00:vv:ww:xx:yy:8b
-  #define CONFIG_ETH2ADDR	00:vv:ww:xx:yy:8c
+#  define CONFIG_ETHADDR	00:vv:ww:xx:yy:8a
+#  define CONFIG_HAS_ETH1
+#  define CONFIG_ETH1ADDR	00:vv:ww:xx:yy:8b
+#  define CONFIG_HAS_ETH2
+#  define CONFIG_ETH2ADDR	00:vv:ww:xx:yy:8c
 #endif
 
 #define CONFIG_SERVERIP		YourServerIP
diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h
index 8e3c392..6bd0abe 100644
--- a/include/configs/SBC8560.h
+++ b/include/configs/SBC8560.h
@@ -388,9 +388,11 @@
 
 /*Note: change below for your network setting!!! */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-  #define CONFIG_ETHADDR	00:vv:ww:xx:yy:8a
-  #define CONFIG_ETH1ADDR	00:vv:ww:xx:yy:8b
-  #define CONFIG_ETH2ADDR	00:vv:ww:xx:yy:8c
+#  define CONFIG_ETHADDR	00:vv:ww:xx:yy:8a
+#  define CONFIG_HAS_ETH1
+#  define CONFIG_ETH1ADDR	00:vv:ww:xx:yy:8b
+#  define CONFIG_HAS_ETH2
+#  define CONFIG_ETH2ADDR	00:vv:ww:xx:yy:8c
 #endif
 
 #define CONFIG_SERVERIP		YourServerIP
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index d6fa798..195c036 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -81,6 +81,8 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif
 
+#define CONFIG_HAS_ETH1
+
 /*-----------------------------------------------------------------------
  * Definitions for status LED
  */
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 3cc4ff4..0235700 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -177,6 +177,10 @@
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CFG_RX_ETH_BUFFER   32	/* Number of ethernet rx buffers & descriptors */
 
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
+#define CONFIG_HAS_ETH2		1	/* add support for "eth2addr"	*/
+#define CONFIG_HAS_ETH3		1	/* add support for "eth3addr"	*/
+
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
 				CFG_CMD_PCI	| \
 				CFG_CMD_IRQ	| \
@@ -186,7 +190,7 @@
 				CFG_CMD_EEPROM	| \
 				CFG_CMD_PING | \
 				CFG_CMD_ELF | \
-			    CFG_CMD_MII | \
+				CFG_CMD_MII | \
 				CFG_CMD_DIAG | \
 				CFG_CMD_FAT )
 
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index a17d035..1f9de35 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -277,6 +277,7 @@
 					CFG_CMD_DOC	| \
 					CFG_CMD_DTT	| \
 					CFG_CMD_EEPROM	| \
+					CFG_CMD_EXT2	| \
 					CFG_CMD_FDC	| \
 					CFG_CMD_FDOS	| \
 					CFG_CMD_HWFLOW	| \
@@ -291,6 +292,7 @@
 					CFG_CMD_REISER	| \
 					CFG_CMD_SCSI	| \
 					CFG_CMD_SPI	| \
+					CFG_CMD_UNIVERSE| \
 					CFG_CMD_USB	| \
 					CFG_CMD_VFD	| \
 					CFG_CMD_XIMG	) )
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 6f19909..90d6b25 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -177,6 +177,7 @@
 					CFG_CMD_BEDBUG	| \
 					CFG_CMD_BMP	| \
 					CFG_CMD_DOC	| \
+					CFG_CMD_EXT2	| \
 					CFG_CMD_FDC	| \
 					CFG_CMD_FDOS	| \
 					CFG_CMD_FPGA    | \
@@ -191,6 +192,7 @@
 					CFG_CMD_REISER	| \
 					CFG_CMD_SCSI	| \
 					CFG_CMD_SPI	| \
+					CFG_CMD_UNIVERSE| \
 					CFG_CMD_VFD	| \
 					CFG_CMD_XIMG	) )
 
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index d36e3c7..abad059 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -58,7 +58,7 @@
 
 #define CONFIG_SYSTEMACE	1
 #define CONFIG_DOS_PARTITION	1
-#define CFG_SYSTEMACE_BASE	XPAR_SYSACE_0_BASEADDR
+#define CFG_SYSTEMACE_BASE	XPAR_OPB_SYSACE_0_BASEADDR
 #define CFG_SYSTEMACE_WIDTH	XPAR_XSYSACE_MEM_WIDTH
 
 #define CFG_ENV_IS_IN_EEPROM	1	/* environment is in EEPROM */
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index d0ee729..9140efb 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -199,7 +199,8 @@
 
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET	    0x00F40000	/*   Offset   of Environment Sector	absolute address 0xfff40000*/
-#define CFG_ENV_SIZE		0x40000 /* Total Size of Environment Sector	*/
+#define CFG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
+#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
 #define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_ENV_OFFSET)
 
 /* Address and size of Redundant Environment Sector	*/
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index cf5ef63..8cf9eeb 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -382,9 +382,11 @@
 
 /*Note: change below for your network setting!!! */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-  #define CONFIG_ETHADDR	00:01:af:07:9b:8a
-  #define CONFIG_ETH1ADDR	00:01:af:07:9b:8b
-  #define CONFIG_ETH2ADDR	00:01:af:07:9b:8c
+#  define CONFIG_ETHADDR	00:01:af:07:9b:8a
+#  define CONFIG_HAS_ETH1
+#  define CONFIG_ETH1ADDR	00:01:af:07:9b:8b
+#  define CONFIG_HAS_ETH2
+#  define CONFIG_ETH2ADDR	00:01:af:07:9b:8c
 #endif
 
 #define CONFIG_SERVERIP		192.168.0.131
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index f5b4836..e9261db 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -368,8 +368,10 @@
 
 /*Note: change below for your network setting!!! */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-#define CONFIG_ETHADDR  00:e0:0c:07:9b:8a
+#define CONFIG_ETHADDR	 00:e0:0c:07:9b:8a
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR  00:e0:0c:07:9b:8b
+#define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:e0:0c:07:9b:8c
 #endif